Shanghai Winbay Tech Co., Limited
Responsibility Co-ordination Efficient Execution
Add to Cart
Heavy duty Chemical Protective Suit
Product Model:XF0030
Heavy-duty Chemical Protective Suit
Chemical protective class one ensemble for firefighters is specially designed for fighters to protect them-self from being damaged by chemical substances when in fire spot or in accident spot.
RHF-02 suits will not getting flux and dropping only carbonization. Sewing to the use of frame-resistant and adhesive strong the Nylon, with both-sides being covering with chemical protective and fire-resistant rubber. Both-surface chemical resistant rubberized fabrics, then process it into the clothing and gloves in glue of laminating then combine with a chemical protective and fire-resistant and spike-resistant of boot to make up a set of clothing.
Requirement of main technical:
(1)main rubberized fabric
Thickness of cloth: 0.45±0.05mm
Breaking strength: ≥450N/5cm(warp and filling)
Tear strength: ≥32N
Acid resistance: It soak in 80%H2S04,60%HN0330%HCL for 1h. (liquid highly 10mm) It is not permeate.
Alkali resistance: It soak in 6.1 mo1/LNa0H for 1h,(liquid highly 10mm) It is not permeate.
(2) Rubber boot performance: The boot of chemical protective clothing can according to the need of customers for producing fireproof boot or buying fireproof boot. Fireproof boot and firefighting boot performance as follows:
|
Fireproof boot |
Firefighting boot |
|
1.Boots of stab resistance:≥780N |
4.Boots of oil resistance:-2 -10% |
|
2.Boots of pressure resistance: ≥5000 |
5the rate of adherence ≥600 N/m |
|
3.Boots of leakage resistance (submerse in water with 2 hours it’s not permeate.) |
6.Boots of pressure resistance: ≥5000 |
|
4.intensity of adherence≥0.78kN/m |
7.after aging its elongate rate ≥75% |
|
Firefighting boot |
8. Boots erode resistance |
|
1.pull apart the rate of elongate≥750% |
9. Boots heat resistance ≤22°C |
|
2.Boots impale resistance ≥900N |
10.Boots slid resistance ≥115° |
|
3.Boots' grind resistance ≤0.9cm3/1.61km |
11.weight ≤1.8kg |
(3) Finished product
Furring adherence intensity ≥0.78KN/m.
Boots of Water permeability resistance (It is not permea- bility after being eroded in15min by 5 water showers nozzle of 3L/min.
Overall weight: ≤ 8 Kg
CONTACT :